-
Products
- VALVES
- FITTINGS
- FORGED FLANGE
- SS WELDED PIPE&TUBE
- SS SMLS TUBE
-
SS SMLS PIPE
- SS SMLS PIPE 2507 ASTM A790
- SS SMLS PIPE 2205 ASTM A790
- SS SMLS PIPE S31803 ASTM A790
- SS SMLS PIPE 904L ASTM A240
- SS SMLS PIPE TP321 ASTM A312
- SS SMLS PIPE TP310S ASTM A312
- SS SMLS PIPE TP316Ti ASTM A312
- SS SMLS PIPE TP316L ASTM A312
- SS SMLS PIPE TP316 ASTM A312
- SS SMLS PIPE TP304L ASTM A312
- SS SMLS PIPE TP304 ASTM A312
TP304L Stainless Steel Welded Pipes & Tubes from China - Professional Suppliers & Factory for Fast Delivery
Introduction
TP304 (UNS S30400) and 304L (UNS S30403) are austenitic stainless steels widely used in welded tubing due to their excellent corrosion resistance, formability, and cost-effectiveness. Both belong to the 18-8 chromium-nickel family, with 304L being the low-carbon variant (L = "Low carbon") designed to minimize carbide precipitation during welding.
Key Features
Microstructure
Single-phase austenitic structure, non-magnetic (unless cold-worked), providing high ductility and toughness.
Corrosion Resistance
Excellent in oxidizing environments (e.g., nitric acid, atmospheric corrosion). Resistant to general corrosion in freshwater, steam, and many organic acids. Susceptible to intergranular corrosion (IGC) if sensitized (e.g., prolonged exposure at 427–816°C), due to chromium carbide precipitation at grain boundaries.
High-Temperature Performance
Retains strength up to ~870°C, suitable for service in moderate high-temperature applications (e.g., furnace parts, heat exchangers).
Weldability
Easily welded by GTAW (TIG), GMAW (MIG), and SAW. Use 308 or 308L filler metal to match corrosion resistance; post-weld heat treatment (PWHT) is generally unnecessary for non-critical applications.
Material Specification
Standard: ASTM A312/A312M (A269&A312&A270)
O.D: 1/8" NB TO 32" NB , (10.29MM-812.80MM) ,(Customization Available)
W.T: SCH 10S, SCH 40S, SCH 80S, SCH160, SCH XXS (Customization Available)
End: Plain End, Beveled End, Threaded
Processing: Cut-to-length; Polishing.
Application:
• Food & Beverage
• Construction
• Automotive
• Pharmaceuticals
• General Engineering
Inspection:
• 100% PMI TESTED
• EN10204.3.1B MILL TEST CERTIFICATE
• THIRD PARTY INSPECTION ACCEPTED
Delivery Condition: Cold Drawn, Annealed and Pickled/ Polished /Bright Annealed/ Sand blasting/ Shot Blasting.
Marking: All SS SMLS Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or as per the customer’s request)
Packing: Packed in Wooden Boxes, plywood cases, Steel Strips Bundled, or as per Customers Requests
Specials: Sizes and Specifications other than above can be customized on request.
Specification Parameters
TP304L CHEMICAL COMPOSITION
| HEAT NO. | CHEMICAL COMPOSITION (%) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Ni | Cr | Mo | ||
| STAND. | MIN. | 8.00 | 18.00 | ||||||
| MAX. | 0.035D | 2.00 | 0.045 | 0.030 | 1.00 | 13.00 | 20.00 | ||
TP304L Mechanical Properties
| Mechanical Properties | |||||
|---|---|---|---|---|---|
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) | Brinell (HB) | ||||
| TP304L | 485 | 170 | 35 | 90 | 187 |
Equivalent Grades - (TP304L ASTM A312 (A269&A312&A270) Equivalent Grades)
| TP304L ASTM A312 (A269&A312&A270) Equivalent Grades | ||||||
|---|---|---|---|---|---|---|
| China (GB) | U.S. (ASTM/UNS) | Europe (EN) | Japan (JIS) | Germany (DIN) | International (ISO) | Russia (GOST) |
| 06Cr19Ni10 (022Cr19Ni10) | 304L (UNS S30403) | 1.4307 (X2CrNi18-9) | SUS304L | X2CrNi18-9 (1.4307) | X2CrNi18-9 | 03Kh18N11 |
ASTM A312/A312M Standard Cold Machining Size Deviation Permitted
| ASTM A312/A312M-09 Standard cold machining size deviation permitted | |||||
|---|---|---|---|---|---|
| Nominal outside diameter | Allowable deviation | Nominal wall thickness | Allowable deviation | ||
| 1/8”—1 1/2“ | (10.29—48.26) | +0.4 -0.8 | 1/8”—1 1/2“ | (10.29-73.03) all of t | +20 -12.5 |
| >1 1/2“—4” | (48.26—114.3) | ±0.8 | 3“—18” | (88.9-457.2) t/D=5% | +22.5 -12.5 |
| >4”—8" | (114.3—219.08) | +1.6 -0.8 | 3“—18” | (88.9-457.2) t/D>5% | +15 -12.5 |
| >8“—18" | (219.08—457.2) | +2.4 -0.8 | ≥20" | =508 t of wld pipe | +17.5 -12.5 |
| >18”—26“ | (457.2—660.4) | +3.2 -0.8 | ≥20" | =508 t/D=5% | +22.5 -12.5 |
| >26”—34” | (660.4—863.6) | +4.0 -0.8 | ≥20" | =508 t/D>5% | +15 -12.5 |
| >34“—48" | (863.6—1219.2) | +4.8 -0.8 | |||
| Thin wall pipe (t/D=3%) ovality condition: Any cross section in a steel pipe Dmax - Dmin=1.5% nominal, and (Dmax - Dmin)/ 2 conforms to the stipulated diameter tolerance range. | |||||
ASTM A269/A269M Standard Cold Machining Size Deviation Permitted
| ASTM A269/A269M Standard cold machining size deviation permitted | ||||||
|---|---|---|---|---|---|---|
| Group | Size, Outside Diameter, in. [mm] | Permissible Variations in Outside Diameter, in. [mm] | Permissible Variations in Wall Thickness, % | Permissible Variations in Cut Length, Over, in. [mm] | Permissible Variations in Cut Length, Under, in. [mm] | Thin Walled Tubes |
| 1 | Up to 1/2 [13] | ±0.005 [0.13] | ±15 | 1/8 [3.2] | 0 | ... |
| 2 | 1/2 to 1 1/2 [13 to 38], excl | ±0.005 [0.13] | ±10 | 1/8 [3.2] | 0 | less than 0.065 in. [1.65 mm] nominal |
| 3 | 1 1/2 to 3 1/2 [38 to 89], excl | ±0.010 [0.25] | ±10 | 3/16 [4.8] | 0 | less than 0.095 in. [2.41 mm] nominal |
| 4 | 3 1/2 to 5 1/2 [89 to 140], excl | ±0.015 [0.38] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 5 | 5 1/2 to 8 [140 to 203], excl | ±0.030 [0.76] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 6 | 8 to 12 [203 to 305], excl | ±0.040 [1.01] | ±10 | 3/16 [4.8] | 0 | less than 0.200 in. [5.08 mm] nominal |
| 7 | 12 to 14 [305 to 356], excl | ±0.050 [1.26] | ±10 | 3/16 [4.8] | 0 | less than 0.220 in. [5.59 mm] nominal |
ASTM A270/A270M Standard Cold Machining Size Deviation Permitted
| ASTM A270/A270M Standard cold machining size deviation permitted | ||||
|---|---|---|---|---|
| Size, Outside Diameter, in.[mm] | Permissible Variations in Outside Diameter, in.[mm] | Permissible Variations in Cut Length, in.[mm] | ||
| Over | Under | Over | Under | |
| 1.000 [25] and under | 0.005 [0.13] | 0.005 [0.13] | 1/8 [3] | 0 |
| Over 1 [25] to 2 [50] | 0.008 [0.20] | 0.008 [0.20] | 1/8 [3] | 0 |
| Over 2 [50] to 3 [75] | 0.010 [0.25] | 0.010 [0.25] | 1/8 [3] | 0 |
| Over 3 [75] to 4 [100] | 0.015 [0.38] | 0.015 [0.38] | 1/8 [3] | 0 |
| Over 4 [100] to 5 1/2 [140], excl | 0.015 [0.38] | 0.015 [0.38] | 3/16 [5] | 0 |
| 5 1/2 [140] to 8 [200], excl | 0.030 [0.75] | 0.030 [0.75] | 3/16 [5] | 0 |
| 8 [200] to 12 [300] | 0.050 [1.25] | 0.050 [1.25] | 3/16 [5] | 0 |
Comparison Table Of American Standard Dimensions - (ANSI B36.19 & ANSI B36.10)
| OD DN | IN | OD MM | ANSI B36.19 | ANSI B36.10 | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal diameter in inches | ||||||||||||||||||||
| 5s | 10s | Sched.40s | Sched.40 | Sched.80s | Sched.80 | 10 | 20 | 30 | Standard | |||||||||||
| mm | Kg/m | mm | Kg/m | mm | Kg/m | mm | mm | Kg/m | mm | mm | Kg/m | mm | Kg/m | mm | Kg/m | mm | Kg/m | |||
| 6 | 1/8" | 10.29 | - | - | 1.24 | 0.281 | 1.73 | 0.371 | 1.73 | 2.41 | 0.467 | 2.41 | - | - | - | - | - | - | 1.73 | 0.371 |
| 8 | 1/4" | 13.72 | - | - | 1.65 | 0.499 | 2.24 | 0.644 | 2 | 3.02 | 0.809 | 3.02 | - | - | - | - | - | - | 2.24 | 0.644 |
| 10 | 3/8" | 17.14 | - | - | 1.65 | 0.64 | 2.31 | 0.858 | 2.31 | 3.2 | 1.118 | 3.2 | - | - | - | - | - | - | 2.31 | 0.858 |
| 15 | 1/2" | 21.34 | 1.65 | 0.814 | 2.11 | 1.016 | 2.77 | 1.26 | 2.77 | 3.73 | 1.62 | 3.73 | - | - | - | - | - | - | 2.77 | 1.26 |
| 20 | 3/4" | 26.67 | 1.65 | 1.034 | 2.11 | 1.298 | 2.87 | 1.68 | 2.87 | 3.91 | 2.19 | 3.91 | - | - | - | - | - | - | 2.87 | 1.68 |
| 25 | 1" | 33.4 | 1.65 | 1.312 | 2.77 | 2.125 | 3.38 | 2.5 | 3.38 | 4.55 | 3.23 | 4.55 | - | - | - | - | - | - | 3.36 | 2.5 |
| 32 | 1 1/4" | 42.16 | 1.65 | 1.674 | 2.77 | 2.732 | 3.56 | 3.38 | 3.56 | 4.85 | 4.46 | 4.85 | - | - | - | - | - | - | 3.56 | 3.38 |
| 40 | 1 1/2" | 48.26 | 1.65 | 1.926 | 2.77 | 3.155 | 3.68 | 4.05 | 3.68 | 5.08 | 5.4 | 5.08 | - | - | - | - | - | - | 3.68 | 4.05 |
| 50 | 2" | 60.32 | 1.65 | 2.424 | 2.77 | 3.992 | 3.91 | 5.43 | 3.91 | 5.54 | 7.47 | 5.54 | - | - | - | - | - | - | 3.91 | 5.43 |
| 65 | 2 1/2" | 73.02 | 2.11 | 3.747 | 3.05 | 5.345 | 5.16 | 8.62 | 5.16 | 7.01 | 11.4 | 7.01 | - | - | - | - | - | - | 5.16 | 8.62 |
| 80 | 3" | 88.9 | 2.11 | 4.585 | 3.05 | 6.557 | 5.49 | 11.28 | 5.49 | 7.62 | 15.25 | 7.62 | - | - | - | - | - | - | 5.49 | 11.28 |
| 90 | 3 1/2" | 101.6 | 2.11 | 5.272 | 3.05 | 7.526 | 5.74 | 13.56 | 5.74 | 8.08 | 18.62 | 8.08 | - | - | - | - | - | - | 5.74 | 13.56 |
| 100 | 4" | 114.3 | 2.11 | 5.945 | 3.05 | 8.496 | 6.02 | 16.06 | 6.02 | 8.56 | 22.29 | 8.56 | - | - | - | - | - | - | 6.02 | 16.06 |
| 125 | 5" | 141.3 | 2.77 | 9.639 | 3.4 | 11.74 | 6.55 | 21.76 | 6.55 | 9.52 | 30.92 | 9.52 | - | - | - | - | - | - | 6.55 | 21.76 |
| 150 | 6" | 168.28 | 2.77 | 11.514 | 3.4 | 14.037 | 7.11 | 28.23 | 7.11 | 10.97 | 42.52 | 10.97 | - | - | - | - | - | - | 7.11 | 28.23 |
| 200 | 8" | 219.08 | 2.77 | 15.049 | 3.76 | 20.334 | 8.18 | 42.49 | 8.18 | 12.7 | 64.57 | 12.7 | - | - | 6.35 | 33.28 | 7.04 | 36.8 | 8.18 | 42.4 |
| 250 | 10" | 273.05 | 3.4 | 23.028 | 4.19 | 28.29 | 9.27 | 60.24 | 9.27 | 12.7 | 81.46 | 15.09 | - | - | 6.35 | 41.7 | 7.8 | 51 | 9.27 | 60.24 |
| 300 | 12" | 323.85 | 3.96 | 31.806 | 4.57 | 36.633 | 9.52 | 73.76 | 10.31 | 12.7 | 97.36 | 17.48 | - | - | 6.35 | 49.68 | 8.38 | 65.14 | 9.52 | 73.76 |
| 350 | 14" | 355.6 | 3.98 | 34.99 | 4.78 | 42.102 | 9.52 | - | 11.13 | - | - | 19.05 | 6.35 | 54.63 | 7.92 | 67.98 | 9.52 | 81.21 | 9.52 | 81.21 |
| 400 | 16" | 406.4 | 4.19 | 42.35 | 4.78 | 48.22 | 9.52 | - | 12.7 | - | - | 21.44 | 6.35 | 62.58 | 7.92 | 77.9 | 9.52 | 93.13 | 9.52 | 93.18 |
| 450 | 18" | 457.2 | 4.19 | 47.7 | 4.78 | 54.3 | 9.52 | - | 14.27 | - | - | 23.82 | 6.35 | 70.5 | 7.92 | 87.8 | 11.13 | 122.12 | 9.52 | 105.05 |
| 500 | 20" | 508 | 4.77 | 60.32 | 5.54 | 69.766 | 9.52 | - | 15.09 | - | - | 26.19 | 6.35 | 78.47 | 9.52 | 116.97 | 12.7 | 155 | 9.52 | 116.97 |
| 550 | 22" | 558.8 | 4.77 | - | 5.54 | - | 9.52 | - | - | - | - | 28.58 | 6.35 | 86.42 | 9.52 | 128.89 | 12.7 | 170.86 | 9.52 | 128.89 |
| 600 | 24" | 609.6 | 5.54 | 84.1 | 6.35 | 96.215 | 9.52 | - | 17.48 | - | - | 30.96 | 6.35 | 96.215 | 9.52 | 140.8 | 14.7 | 209.54 | 9.52 | 140.81 |
| 650 | 26" | 660.4 | - | - | - | - | 9.52 | - | - | - | - | - | 7.92 | 127.58 | 12.7 | 202.65 | - | - | 9.52 | 152.73 |
| 700 | 28" | 711.2 | - | - | - | - | 9.52 | - | - | - | - | - | 7.92 | 137.52 | 12.7 | 218.54 | 15.88 | 271.94 | 9.52 | 164.65 |
| 750 | 30" | 762 | 6.35 | 120.59 | 7.92 | 147.45 | 9.52 | - | - | - | - | - | 7.92 | 147.45 | 12.7 | 234.44 | 15.88 | 291.81 | 9.52 | 176.57 |
| 800 | 32" | 812 | - | - | - | - | 9.52 | - | 17.48 | - | - | - | 7.92 | 157.39 | 12.7 | 250.33 | 15.88 | 311.67 | 9.52 | 188.5 |
| 850 | 34" | 863.6 | - | - | - | - | 9.52 | - | 17.48 | - | - | - | 7.92 | 167.32 | 12.7 | 266.22 | 15.88 | 331.54 | 9.52 | 200.42 |
| 900 | 36" | 914.4 | - | - | - | - | 9.52 | - | 19.05 | - | - | - | 7.92 | 177.26 | 12.7 | 282.18 | 15.88 | 351.41 | 9.52 | 212.34 |
Frequently Asked Questions (FAQ)
Q1: What is the main difference between TP304 and TP304L stainless steel?
A: TP304L is the low-carbon version of TP304. It contains a maximum of 0.035% carbon (compared to TP304's higher limit), which minimizes carbide precipitation during welding and reduces susceptibility to intergranular corrosion.
Q2: What standards apply to TP304/304L welded tubing?
A: These materials are commonly specified under ASTM A312/A312M (for pipes), ASTM A269/A269M (for general service tubing), and ASTM A270/A270M (for sanitary tubing).
Q3: Are TP304 and TP304L stainless steels magnetic?
A: No, both materials have a single-phase austenitic microstructure and are non-magnetic in the annealed condition. However, they may become slightly magnetic after cold working.
Q4: What is the maximum service temperature for TP304/304L stainless steel?
A: These grades retain their strength and oxidation resistance at elevated temperatures, making them suitable for moderate high-temperature service up to approximately 870°C.
Q5: Is post-weld heat treatment (PWHT) required for TP304L?
A: Generally, post-weld heat treatment is not necessary for non-critical applications when using TP304L, as its low carbon content prevents sensitization during the welding process.
Q6: What are the primary applications of TP304/304L tubing?
A: Due to their excellent corrosion resistance and formability, they are widely used in the food and beverage industry, construction, automotive parts, pharmaceuticals, and general engineering applications.