S32205 GRADE Duplex SS SMLS PIPE
Introduction
ASTM A790/A790M S32205 duplex stainless steel pipes combine austenitic-ferritic microstructure to deliver superior strength and corrosion resistance at a cost-effective price point. With 22%-23% chromium, 4.5%-6.5% nickel, 3%-3.5% molybdenum, and 0.14%-0.20% nitrogen, this alloy excels in chloride-rich and mildly sour environments, outperforming 316L and standard austenitic steels while maintaining economical viability.
Key Features
High Strength-to-Weight Ratio: Yield strength ≥450 MPa (twice 316L), enabling thinner walls and reduced material costs.
Robust Corrosion Resistance: PREN ≥34 resists pitting, crevice corrosion, and stress corrosion cracking (SCC) in seawater, brine, and H₂S-containing media.
Thermal Versatility: Stable performance from -50°C to 280°C (-58°F to 536°F), ideal for subsea and chemical processing.
Why Choose S32205 Duplex Stainless Steel Pipe?
Unmatched Corrosion Resistance: High PREN (Pitting Resistance Equivalent Number) ensures reliability in chloride-rich environments (e.g., seawater, brine) where 316L or 304L would fail.
High Strength-to-Weight Advantage: Yield strength (~450 MPa) allows reduced wall thickness, lowering material and installation costs while maintaining pressure ratings.
Cost-Effective for Demanding Conditions: Balances performance and cost between standard austenitic steels (e.g., 316L) and super duplex grades (e.g., S32750).
Stress Corrosion Cracking (SCC) Immunity: Critical for oil/gas applications with H₂S/CO₂ exposure or high-pressure systems.
Thermal & Mechanical Stability: Retains properties across a wide temperature range, ideal for cyclic thermal loads.
Certified Compliance: Meets ASTM A790/A928 standards for seamless/welded duplex stainless steel pipes.
Example Use Case
A seawater cooling system in a Middle East desalination plant switched from 316L to S32205 pipes, eliminating pitting corrosion issues and achieving a 25% reduction in system weight with no failures over 10+ years.
Material Specification
Standard: ASTM A790/A790M
O.D: 1/8" NB TO 32" NB , (10.29MM-812.80MM) ,(Customization Available)
W.T: SCH 10S, SCH 40S, SCH 80S, SCH160, SCH XXS (Customization Available)
Application: Oil & Gas Production Systems
Chemical Processing Equipment
Offshore and Marine Applications
Desalination Plants
Pulp & Paper Industry
Power Generation (FGD Systems)
Wastewater Treatment Plants
Heat Exchangers and Condensers
End: Plain End, Beveled End, Threaded
Processing: Cut-to-length;Polishing.
Inspection
100% PMI TESTED
EN10204.3.1B MILL TEST CERTIFICATE
THIRD PARTY INSPECTION ACCEPTED
Delivery Condition: Cold Drawn, Annealed and Pickled/ Polished /Bright Annealed/ Sand blasting/ Shot Blasting.
Marking: All SS SMLS Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or as per the customer’s request)
Packing: Packed in Wooden Boxes, plywood cases, Steel Strips Bundled, or as per Customers Requests
Specials: Sizes and Specifications other than above can be customized on request.
Specification parameters
S32205 chemical composition
|
HEAT NO. |
CHEMICAL COMPOSITION (%) |
|||||||||
|
C |
Mn |
P |
S |
Si |
Ni |
Cr |
Mo |
N |
||
|
STAND. |
MIN. |
4.50 |
22.00 |
3.00 |
0.14 |
|||||
|
MAX. |
0.03 |
2.00 |
0.03 |
0.020 |
1.00 |
6.50 |
23.00 |
3.50 |
0.20 |
|
S32205 Mechanical Properties
|
Mechanical Properties |
|||||
|
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
|
|
HRW |
HRC |
||||
|
S32205 |
655 |
450 |
25 |
290 |
30 |
Equivalent Grades - (ASTM A790/A790M S32205 Equivalent Grades)
| ASTM A790/A790M S32205 (UNS S32205) Equivalent Grades | ||||||
| ISO | EN (Europe) | DIN (Germany) | JIS (Japan) | GB (China) | UNS (USA) | Common Name |
| X2CrNiMoN22-5-3 (ISO 15510) | 1.4462 (EN 10088-2) | X2CrNiMoN22-5-3 (DIN 17440) | SUS 329J3L (JIS G3463) | 022Cr22Ni5Mo3N (GB/T 21833) | S32205 | 2205 (Duplex) |
ASTM A312/A312M Standard Cold Machining size Deviation Permitted
|
ASTM A312/A312M-09 Standard Permitted Tolerance of WT and OD |
|||||
|
Nominal Outside Diameter |
Allowable daviation |
Nominal wall thickness |
Allowable deviation |
||
|
1/8”—1 1/2“ |
(10.29—48.26) |
+0.4 -0.8 |
1/8”—1 1/2“ |
(10.29-73.03) all of t |
+20 -12.5 |
|
>1 1/2“—4” |
(48.26—114.3) |
±0.8 |
3“—18” |
(88.9-457.2) t/D=5% |
+22.5 -12.5 |
|
>4”—8" |
(114.3—219.08) |
+1.6 -0.8 |
3“—18” |
(88.9-457.2) t/D>5% |
+15 -12.5 |
|
>8“—18" |
(219.08—457.2) |
+2.4 -0.8 |
≥20" |
=508 t of wld pipe |
+17.5 -12.5 |
|
>18”—26“ |
(457.2—660.4) |
+3.2 -0.8 |
≥20" |
=508 t/D=5% |
+22.5 -12.5 |
|
>26”—34” |
(660.4—863.6) |
+4.0 -0.8 |
≥20" |
=508 t/D>5% |
+15 -12.5 |
|
>34“—48" |
(863.6—1219.2) |
+4.8 -0.8 |
|
|
|
|
Thin wall pipe (t/D=3%) ovality condition: Any cross section in a steel pipe Dmax Dmin=1.5%nominal,and(Dmax Dmin)/ 2 conforms to the stipulated diameter tolerance range. |
|||||
Comparison Table Of American Standard Dimensions - (ANSI B36.19&ANSI B36.10) (This data refers to ASTM A312)
| OD DN | IN | OD MM | ANSI B36.19 | ANSI B36.10 | ||||||||||||||||
| Nominal diameter in inches | ||||||||||||||||||||
| 5s | 10s | Sched.40s | Sched.40 | Sched.80s | Sched.80 | 10 | 20 | 30 | Standard | |||||||||||
| mm | Kg/m | mm | Kg/m | mm | Kg/m | mm | mm | Kg/m | mm | mm | Kg/m | mm | Kg/m | mm | Kg/m | mm | Kg/m | |||
| 6 | 1/8" | 10.29 | - | - | 1.24 | 0.281 | 1.73 | 371 | 1.73 | 2.41 | 0.467 | 2.41 | - | - | - | - | - | - | 1.73 | 0.371 |
| 8 | 1/4" | 13.72 | - | - | 1.65 | 0.499 | 2.24 | 0.644 | 2 | 3.02 | 0.809 | 3.02 | - | - | - | - | - | - | 2.24 | 0.644 |
| 10 | 3/8" | 17.14 | - | - | 1.65 | 0.64 | 2.31 | 0.858 | 2.31 | 3.2 | 1.118 | 3.2 | - | - | - | - | - | - | 2.31 | 0.858 |
| 15 | 1/2" | 21.34 | 1.65 | 0.814 | 2.11 | 1.016 | 2.77 | 1.26 | 2.77 | 3.73 | 1.62 | 3.73 | - | - | - | - | - | - | 2.77 | 1.26 |
| 20 | 3/4" | 26.67 | 1.65 | 1.034 | 2.11 | 1.298 | 2.87 | 1.68 | 2.87 | 3.91 | 2.19 | 3.91 | - | - | - | - | - | - | 2.87 | 1.68 |
| 25 | 1" | 33.4 | 1.65 | 1.312 | 2.77 | 2.125 | 3.38 | 2.5 | 3.38 | 4.55 | 3.23 | 4.55 | - | - | - | - | - | - | 3.36 | 2.5 |
| 32 | 1 1/4" | 42.16 | 1.65 | 1.674 | 2.77 | 2.732 | 3.56 | 3.38 | 3.56 | 4.85 | 4.46 | 4.85 | - | - | - | - | - | - | 3.56 | 3.38 |
| 40 | 1 1/2" | 48.26 | 1.65 | 1.926 | 2.77 | 3.155 | 3.68 | 4.05 | 3.68 | 5.08 | 5.4 | 5.08 | - | - | - | - | - | - | 3.68 | 4.05 |
| 50 | 2" | 60.32 | 1.65 | 2.424 | 2.77 | 3.992 | 3.91 | 5.43 | 3.91 | 5.54 | 7.47 | 5.54 | - | - | - | - | - | - | 3.91 | 5.43 |
| 65 | 2 1/2" | 73.02 | 2.11 | 3.747 | 3.05 | 5.345 | 5.16 | 8.62 | 5.16 | 7.01 | 11.4 | 7.01 | - | - | - | - | - | - | 5.16 | 8.62 |
| 80 | 3" | 88.9 | 2.11 | 4.585 | 3.05 | 6.557 | 5.49 | 11.28 | 5.49 | 7.62 | 15.25 | 7.62 | - | - | - | - | - | - | 5.49 | 11.28 |
| 90 | 3 1/2" | 101.6 | 2.11 | 5.272 | 3.05 | 7.526 | 5.74 | 13.56 | 5.74 | 8.08 | 18.62 | 8.08 | - | - | - | - | - | - | 5.74 | 13.56 |
| 100 | 4" | 114.3 | 2.11 | 5.945 | 3.05 | 8.496 | 6.02 | 16.06 | 6.02 | 8.56 | 22.29 | 8.56 | - | - | - | - | - | - | 6.02 | 16.06 |
| 125 | 5" | 141.3 | 2.77 | 9.639 | 3.4 | 11.74 | 6.55 | 21.76 | 6.55 | 9.52 | 30.92 | 9.52 | - | - | - | - | - | - | 6.55 | 21.76 |
| 150 | 6" | 168.28 | 2.77 | 11.514 | 3.4 | 14.037 | 7.11 | 28.23 | 7.11 | 10.97 | 42.52 | 10.97 | - | - | - | - | - | - | 7.11 | 28.23 |
| 200 | 8" | 219.08 | 2.77 | 15.049 | 3.76 | 20.334 | 8.18 | 42.49 | 8.18 | 12.7 | 64.57 | 12.7 | - | - | 6.35 | 33.28 | 7.04 | 36.8 | 8.18 | 42.4 |
| 250 | 10" | 273.05 | 3.4 | 23.028 | 4.19 | 28.29 | 9.27 | 60.24 | 9.27 | 12.7 | 81.46 | 15.09 | - | - | 6.35 | 41.7 | 7.8 | 51 | 9.27 | 60.24 |
| 300 | 12" | 323.85 | 3.96 | 31.806 | 4.57 | 36.633 | 9.52 | 73.76 | 10.31 | 12.7 | 97.36 | 17.48 | - | - | 6.35 | 49.68 | 8.38 | 65.14 | 9.52 | 73.76 |
| 350 | 14" | 355.6 | 3.98 | 34.99 | 4.78 | 42.102 | 9.52 | - | 11.13 | - | - | 19.05 | 6.35 | 54.63 | 7.92 | 67.98 | 9.52 | 81.21 | 9.52 | 81.21 |
| 400 | 16" | 406.4 | 4.19 | 42.35 | 4.78 | 48.22 | 9.52 | - | 12.7 | - | - | 21.44 | 6.35 | 62.58 | 7.92 | 77.9 | 9.52 | 93.13 | 9.52 | 93.18 |
| 450 | 18" | 457.2 | 4.19 | 47.7 | 4.78 | 54.3 | 9.52 | - | 14.27 | - | - | 23.82 | 6.35 | 70.5 | 7.92 | 87.8 | 11.13 | 122.12 | 9.52 | 105.05 |
| 500 | 20" | 508 | 4.77 | 60.32 | 5.54 | 69.766 | 9.52 | - | 15.09 | - | - | 26.19 | 6.35 | 78.47 | 9.52 | 116.97 | 12.7 | 155 | 9.52 | 116.97 |
| 550 | 22" | 558.8 | 4.77 | - | 5.54 | - | 9.52 | - | - | - | - | 28.58 | 6.35 | 86.42 | 9.52 | 128.89 | 12.7 | 170.86 | 9.52 | 128.89 |
| 600 | 24" | 609.6 | 5.54 | 84.1 | 6.35 | 96.215 | 9.52 | - | 17.48 | - | - | 30.96 | 6.35 | 96.215 | 9.52 | 140.8 | 14.7 | 209.54 | 9.52 | 140.81 |
| 650 | 26" | 660.4 | - | - | - | - | 9.52 | - | - | - | - | - | 7.92 | 127.58 | 12.7 | 202.65 | - | - | 9.52 | 152.73 |
| 700 | 28" | 711.2 | - | - | - | - | 9.52 | - | - | - | - | - | 7.92 | 137.52 | 12.7 | 218.54 | 15.88 | 271.94 | 9.52 | 164.65 |
| 750 | 30" | 762 | 6.35 | 120.59 | 7.92 | 147.45 | 9.52 | - | - | - | - | - | 7.92 | 147.45 | 12.7 | 234.44 | 15.88 | 291.81 | 9.52 | 176.57 |
| 800 | 32" | 812 | - | - | - | - | 9.52 | - | 17.48 | - | - | - | 7.92 | 157.39 | 12.7 | 250.33 | 15.88 | 311.67 | 9.52 | 188.5 |
| 850 | 34" | 863.6 | - | - | - | - | 9.52 | - | 17.48 | - | - | - | 7.92 | 167.32 | 12.7 | 266.22 | 15.88 | 331.54 | 9.52 | 200.42 |
| 900 | 36" | 914.4 | - | - | - | - | 9.52 | - | 19.05 | - | - | - | 7.92 | 177.26 | 12.7 | 282.18 | 15.88 | 351.41 | 9.52 | 212.34 |