-
Products
- VALVES
- FITTINGS
- FORGED FLANGE
- SS WELDED PIPE&TUBE
- SS SMLS TUBE
-
SS SMLS PIPE
- SS SMLS PIPE 2507 ASTM A790
- SS SMLS PIPE 2205 ASTM A790
- SS SMLS PIPE S31803 ASTM A790
- SS SMLS PIPE 904L ASTM A240
- SS SMLS PIPE TP321 ASTM A312
- SS SMLS PIPE TP310S ASTM A312
- SS SMLS PIPE TP316Ti ASTM A312
- SS SMLS PIPE TP316L ASTM A312
- SS SMLS PIPE TP316 ASTM A312
- SS SMLS PIPE TP304L ASTM A312
- SS SMLS PIPE TP304 ASTM A312
China Suppliers Factory for ASTM A269/A270/A213 TP304 Stainless Steel Seamless Tubes - Fast Delivery Available
Introduction
A standard austenitic stainless steel under ASTM A269, widely used for seamless and welded tubing in general corrosion-resistant applications. It contains 18–20% Cr and 8–11% Ni, offering balanced mechanical properties and formability.
Key Features
Corrosion Resistance
Resists oxidation and organic acids but may suffer from intergranular corrosion in welded areas due to carbide precipitation.
High-Temperature Stability
Maintains strength up to 870°C, suitable for moderate heat environments.
Applications
Fluid/gas transfer, heat exchangers, and industrial piping systems.
Why Choose TP304 Stainless Steel Tube?
Superior Corrosion Resistance
TP304 resists oxidation, organic acids, and mild corrosive environments, making it ideal for applications exposed to moisture, chemicals, or saline atmospheres. Its chromium content forms a passive oxide layer that self-repairs when damaged.
High-Temperature Stability
Withstanding temperatures up to 870°C (1600°F) intermittently, TP304 is suitable for heat exchangers, exhaust systems, and industrial furnaces.
Mechanical Strength and Ductility
The alloy maintains excellent tensile strength and elongation even at cryogenic temperatures, ensuring reliability under mechanical stress or thermal cycling.
Ease of Fabrication
TP304’s outstanding formability and weldability (via TIG, MIG, or laser welding) allow for seamless integration into complex designs without sacrificing performance.
Hygienic and Aesthetic Appeal
Its smooth surface inhibits bacterial growth, critical for food, pharmaceutical, and medical industries. Additionally, its polished finish is visually appealing for architectural uses.
Cost-Effectiveness
Compared to higher-grade alloys like TP316, TP304 offers a budget-friendly solution for applications where extreme chloride resistance is not required.
Compliance with Standards
TP304 tube meets international specifications (e.g., ASTM A269, A213) and is NSF-certified for potable water systems, ensuring quality and safety.
Material Specification
Standard
ASTM A269 & A270 & A213
O.D
1/8" NB TO 32" NB, (10.29MM-812.80MM), (Customization Available)
W.T
SCH 10S, SCH 40S, SCH 80S, SCH160, SCH XXS (Customization Available)
Application
- Heat Exchangers and Boilers
- Food and Beverage Processing
- Petrochemical and Energy Sectors
- Architectural and Decorative Uses
- Food & Dairy Plants
- Pharmaceutical Plant
End
Plain End, Beveled End, Threaded
Processing
Cut-to-length; Polishing.
Inspection
- 100% PMI TESTED
- EN10204.3.1B MILL TEST CERTIFICATE
- THIRD PARTY INSPECTION ACCEPTED
Delivery Condition
Cold Drawn, Annealed and Pickled/ Polished /Bright Annealed/ Sand blasting/ Shot Blasting.
Marking
All SS SMLS Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or as per the customer’s request)
Packing
Packed in Wooden Boxes, plywood cases, Steel Strips Bundled, or as per Customers Requests
Specials
Sizes and Specifications other than above can be customized on request.
Specification Parameters
A269/270/213 TP304 Chemical Composition
| HEAT NO. | CHEMICAL COMPOSITION (%) | |||||||
|---|---|---|---|---|---|---|---|---|
| STAND. | Range | C | Mn | P | S | Si | Ni | Cr |
| ASTM A269 | MIN. | - | - | - | - | - | 8.00 | 18.00 |
| MAX. | 0.080 | 2.00 | 0.045 | 0.030 | 1.00 | 11.00 | 20.00 | |
A269/270/213 TP304 Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness (MAX) | |
|---|---|---|---|---|---|
| Rockwell (HRB) | Brinell (HBW) | ||||
| ASTM A269 TP304 | - | - | - | 90 | 192 |
| ASTM A213 TP304 | 515 | 205 | 35 | 90 | 192 |
| ASTM A270 TP304 | 515 | 205 | 35 | B90 | - |
Equivalent Grades (ASTM A269 & A270 & A213 TP304)
| USA (ASTM / AISI) | Germany (DIN, WNr) | Japan (JIS) | France (AFNOR) | England (BS) | Euronorms (EN) | China (GB) |
|---|---|---|---|---|---|---|
| 304 304H S30400 |
1.4301 1.5301 X5CrNi18-10 |
SUS304 | 304F00 X5CN18-10 |
304S11 304S15 304S16 |
1.4301 1.4948 |
0Cr19Ni9 0Cr18Ni9 |
ASTM A269/A269M Standard Cold Machining Size Deviation Permitted
| Group | Outside Diameter, in. [mm] | Permissible Variations in OD, in. [mm] | Permissible Variations in WT, % | Permissible Variations in Cut Length, in. [mm] | Thin Walled Tubes | |
|---|---|---|---|---|---|---|
| Over | Under | |||||
| 1 | Up to 1/2 [13] | ±0.005 [0.13] | ±15 | 1/8 [3.2] | 0 | ... |
| 2 | 1/2 to 1 1/2 [13 to 38] | ±0.005 [0.13] | ±10 | 1/8 [3.2] | 0 | less than 0.065 in. [1.65 mm] |
| 3 | 1 1/2 to 3 1/2 [38 to 89] | ±0.010 [0.25] | ±10 | 3/16 [4.8] | 0 | less than 0.095 in. [2.41 mm] |
| 4 | 3 1/2 to 5 1/2 [89 to 140] | ±0.015 [0.38] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] |
| 5 | 5 1/2 to 8 [140 to 203] | ±0.030 [0.76] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] |
| 6 | 8 to 12 [203 to 305] | ±0.040 [1.01] | ±10 | 3/16 [4.8] | 0 | less than 0.200 in. [5.08 mm] |
| 7 | 12 to 14 [305 to 356] | ±0.050 [1.26] | ±10 | 3/16 [4.8] | 0 | less than 0.220 in. [5.59 mm] |
ASTM A270/A270M Standard Cold Machining Size Deviation Permitted
| Outside Diameter, in. [mm] | Permissible Variations in OD, in. [mm] | Permissible Variations in Cut Length, in. [mm] | ||
|---|---|---|---|---|
| Over | Under | Over | Under | |
| 1.000 [25] and under | 0.005 [0.13] | 0.005 [0.13] | 1/8 [3] | 0 |
| Over 1 [25] to 2 [50] | 0.008 [0.20] | 0.008 [0.20] | 1/8 [3] | 0 |
| Over 2 [50] to 3 [75] | 0.010 [0.25] | 0.010 [0.25] | 1/8 [3] | 0 |
| Over 3 [75] to 4 [100] | 0.015 [0.38] | 0.015 [0.38] | 1/8 [3] | 0 |
| Over 4 [100] to 5 1/2 [140] | 0.015 [0.38] | 0.015 [0.38] | 3/16 [5] | 0 |
| 5 1/2 [140] to 8 [200] | 0.030 [0.75] | 0.030 [0.75] | 3/16 [5] | 0 |
| 8 [200] to 12 [300] | 0.050 [1.25] | 0.050 [1.25] | 3/16 [5] | 0 |
Frequently Asked Questions
What is TP304 stainless steel tubing?
TP304 is a standard austenitic stainless steel grade under specifications like ASTM A269, A270, and A213. It features a chemical composition of 18–20% Chromium and 8–11% Nickel, offering balanced corrosion resistance, excellent formability, and reliable mechanical properties.
What are the primary applications of ASTM A269 TP304 tubes?
These tubes are widely used in fluid and gas transfer, heat exchangers, boilers, food and beverage processing, pharmaceutical plants, petrochemical operations, energy sectors, and architectural or decorative projects due to their hygienic properties and corrosion resistance.
What is the maximum temperature limit for TP304 stainless steel?
TP304 stainless steel exhibits high-temperature stability and can maintain its strength and resist oxidation at temperatures up to 870°C (1600°F) under intermittent service conditions.
How does TP304 compare to TP316 regarding cost and performance?
TP304 is highly cost-effective and suitable for general corrosion-resistant applications. However, for extreme chloride environments (like marine applications), higher-grade alloys like TP316 are preferred due to their superior pitting resistance.
What testing and inspections are performed on these tubes?
The tubes undergo rigorous quality control including 100% PMI (Positive Material Identification) testing. They are supplied with EN10204.3.1B Mill Test Certificates, and third-party inspections are fully accepted to ensure compliance with ASTM standards.