-
Products
- VALVES
- FITTINGS
- FORGED FLANGE
- SS WELDED PIPE&TUBE
- SS SMLS TUBE
-
SS SMLS PIPE
- SS SMLS PIPE 2507 ASTM A790
- SS SMLS PIPE 2205 ASTM A790
- SS SMLS PIPE S31803 ASTM A790
- SS SMLS PIPE 904L ASTM A240
- SS SMLS PIPE TP321 ASTM A312
- SS SMLS PIPE TP310S ASTM A312
- SS SMLS PIPE TP316Ti ASTM A312
- SS SMLS PIPE TP316L ASTM A312
- SS SMLS PIPE TP316 ASTM A312
- SS SMLS PIPE TP304L ASTM A312
- SS SMLS PIPE TP304 ASTM A312
China Suppliers ASTM A269/A270/A213 TP316 Stainless Steel Seamless Tubes Factory - Fast Delivery Available
Introduction
ASTM A269 TP316 is a molybdenum-bearing austenitic stainless steel tube, designed for demanding corrosive and high-temperature applications. As part of the 316 family, it incorporates 2.0–3.0% molybdenum (Mo), significantly enhancing its resistance to pitting, crevice corrosion, and chemical attack compared to non-molybdenum grades like TP304. The standard carbon content (≤0.08%) makes it suitable for applications where post-weld heat treatment is feasible or sensitization risks are managed.
Key Features
✓
High-Temperature Performance: Retains mechanical stability up to 870°C, ideal for boilers and heat exchangers.
✓
Surface Finish Options: Available in bright annealed (BA), polished, or electropolished finishes.
✓
Common Applications: Chemical processing equipment, marine hardware, and industrial piping systems.
Material Specification
Standard
ASTM A269 & A270 & A213
O.D
1/8" NB TO 32" NB, (10.29MM-812.80MM), (Customization Available)
W.T
SCH 10S, SCH 40S, SCH 80S, SCH160, SCH XXS (Customization Available)
Application
- Chemical & Petrochemical Industries
- High-Temperature Applications
- Food & Pharmaceutical
- Energy Sector
- Marine & Shipbuilding
- General Industrial Piping
End
Plain End, Beveled End, Threaded
Processing
Cut-to-length; Polishing.
Inspection
- 100% PMI TESTED
- EN10204.3.1B MILL TEST CERTIFICATE
- THIRD PARTY INSPECTION ACCEPTED
- Delivery Condition: Cold Drawn, Annealed and Pickled / Polished / Bright Annealed / Sand blasting / Shot Blasting
Marking
All SS SMLS Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or as per the customer’s request)
Packing
Packed in Wooden Boxes, plywood cases, Steel Strips Bundled, or as per Customers Requests
Specials
Sizes and Specifications other than above can be customized on request.
Specification parameters
CHEMICAL COMPOSITION - TP316 (ASTM A269/A269M)
| HEAT NO. | CHEMICAL COMPOSITION (%) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Ni | Cr | Mo | ||
| STAND. | MIN. | 10.00 | 16.00 | 2.0 | |||||
| MAX. | 0.080 | 2.00 | 0.045 | 0.030 | 1.00 | 14.00 | 18.00 | 3.0 | |
CHEMICAL COMPOSITION - TP316 (ASTM A270 & ASTM A213)
| HEAT NO. | CHEMICAL COMPOSITION (%) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Ni | Cr | Mo | ||
| STAND. | MIN. | 10.00 | 16.00 | 2.0 | |||||
| MAX. | 0.080 | 2.00 | 0.045 | 0.030 | 1.00 | 14.00 | 18.00 | 3.0 | |
Mechanical Properties
| Mechanical Properties | |||||
|---|---|---|---|---|---|
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness MAX | |
| Rockwell (HRB) | Brinell (HBW) | ||||
| ASTM A269 TP316 | 90 | 192 | |||
| ASTM A213 TP316 | 515 | 205 | 35 | 90 | 192 |
| ASTM A270 TP316 | 515 | 205 | 35 | B90 | |
Equivalent Grades - (ASTM A269 & A270 & A213 TP316 Equivalent Grades)
| ASTM A269 & A270 & A213 TP316 Equivalent Grades | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| USA (ASTM / AISI) | Germany (DIN, WNr) | Japan (JIS) | France (AFNOR) | England (BS) | Euronorms (EN) | China (GB) | India (IS) | International (ISO) | Russia (GOST) |
| TP316 316 | X5CrNiMo17-12-2 (1.4401) | SUS316 | Z7CND17-11-02 | 316S31 316S33 | 1.4401 | 06Cr17Ni12Mo2 | 04Cr17Ni12Mo2 | X5CrNiMo17-12-2 | 08Х17Н13М2 |
ASTM A269/A269M Standard Cold Machining Size Deviation Permitted
| ASTM A269/A269M Standard cold machining size deviation permitted | ||||||
|---|---|---|---|---|---|---|
| Group | Size, Outside Diameter, in. [mm] | Permissible Variations in Outside Diameter, in. [mm] | Permissible Variations in Wall Thickness, A % | Permissible Variations in Cut Length, in. [mm] B | Thin Walled Tubes C | |
| Over | Under | |||||
| 1 | Up to 1/2 [13] | ±0.005 [0.13] | ±15 | 1/8 [3.2] | 0 | ... |
| 2 | 1/2 to 1 1/2 [13 to 38], excl | ±0.005 [0.13] | ±10 | 1/8 [3.2] | 0 | less than 0.065 in. [1.65 mm] nominal |
| 3 | 1 1/2 to 3 1/2 [38 to 89], excl | ±0.010 [0.25] | ±10 | 3/16 [4.8] | 0 | less than 0.095 in. [2.41 mm] nominal |
| 4 | 3 1/2 to 5 1/2 [89 to 140], excl | ±0.015 [0.38] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 5 | 5 1/2 to 8 [140 to 203], excl | ±0.030 [0.76] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 6 | 8 to 12 [203 to 305], excl | ±0.040 [1.01] | ±10 | 3/16 [4.8] | 0 | less than 0.200 in. [5.08 mm] nominal |
| 7 | 12 to 14 [305 to 356], excl | ±0.050 [1.26] | ±10 | 3/16 [4.8] | 0 | less than 0.220 in. [5.59 mm] nominal |
ASTM A270/A270M Standard Cold Machining Size Deviation Permitted
| ASTM A270/A270M Standard cold machining size deviation permitted | ||||
|---|---|---|---|---|
| Size, Outside Diameter, in. [mm] | Permissible Variations in Outside Diameter, in. [mm] | Permissible Variations in Cut Length, in. [mm] A | ||
| Over | Under | Over | Under | |
| 1.000 [25] and under | 0.005 [0.13] | 0.005 [0.13] | 1/8 [3] | 0 |
| Over 1 [25] to 2 [50] | 0.008 [0.20] | 0.008 [0.20] | 1/8 [3] | 0 |
| Over 2 [50] to 3 [75] | 0.010 [0.25] | 0.010 [0.25] | 1/8 [3] | 0 |
| Over 3 [75] to 4 [100] | 0.015 [0.38] | 0.015 [0.38] | 1/8 [3] | 0 |
| Over 4 [100] to 5 1/2 [140], excl | 0.015 [0.38] | 0.015 [0.38] | 3/16 [5] | 0 |
| 5 1/2 [140] to 8 [200], excl | 0.030 [0.75] | 0.030 [0.75] | 3/16 [5] | 0 |
| 8 [200] to 12 [300] | 0.050 [1.25] | 0.050 [1.25] | 3/16 [5] | 0 |
Frequently Asked Questions (FAQ)
Q
What is the primary difference between ASTM A269 TP316 and TP304 stainless steel?
ASTM A269 TP316 contains 2.0–3.0% molybdenum, which significantly enhances its resistance to pitting, crevice corrosion, and chemical attacks in comparison to non-molybdenum grades like TP304.
Q
What standard sizes and dimensions are available for these tubes?
The outer diameter ranges from 1/8" NB to 32" NB (10.29mm to 812.80mm), and wall thicknesses conform to schedules such as SCH 10S, SCH 40S, SCH 80S, SCH160, and SCH XXS. Customization is also available.
Q
What are the common industrial applications of ASTM A269 TP316?
It is widely used in chemical and petrochemical processing, marine and shipbuilding, high-temperature boilers and heat exchangers, food and pharmaceutical production, energy sectors, and general industrial piping.
Q
What surface finishes can be requested for ASTM A269 TP316?
Available surface finish options include bright annealed (BA), polished, or electropolished finishes.
Q
What quality inspections are standard for these stainless steel tubes?
Tubes undergo 100% PMI testing, are supplied with an EN10204.3.1B Mill Test Certificate, and third-party inspection is accepted. Delivery conditions can be cold drawn, annealed and pickled, polished, or bright annealed.