-
Products
- VALVES
- FITTINGS
- FORGED FLANGE
- SS WELDED PIPE&TUBE
- SS SMLS TUBE
-
SS SMLS PIPE
- SS SMLS PIPE 2507 ASTM A790
- SS SMLS PIPE 2205 ASTM A790
- SS SMLS PIPE S31803 ASTM A790
- SS SMLS PIPE 904L ASTM A240
- SS SMLS PIPE TP321 ASTM A312
- SS SMLS PIPE TP310S ASTM A312
- SS SMLS PIPE TP316Ti ASTM A312
- SS SMLS PIPE TP316L ASTM A312
- SS SMLS PIPE TP316 ASTM A312
- SS SMLS PIPE TP304L ASTM A312
- SS SMLS PIPE TP304 ASTM A312
ASTM A269/270/213 TP304L Stainless Steel Seamless Tube - China Suppliers & Factory Stock Available
Introduction
A low-carbon variant of TP304L (C ≤0.035%), designed to minimize carbide formation and enhance weldability under ASTM A269/270/213 standards.
Key Features
Reduced Intergranular Corrosion
Lower carbon content prevents chromium carbide precipitation, ideal for welded structures in corrosive environments (e.g., chlorides).
Improved Ductility
Retains toughness even at cryogenic temperatures (down to 0°C).
Applications
Pharmaceutical, semiconductor, and sanitary systems requiring high-purity surfaces (e.g., electropolished tubes).
Material Specification
Standard
ASTM A269/270/213
O.D
1/8" NB TO 32" NB, (10.29MM-812.80MM), (Customization Available)
W.T
SCH 10S, SCH 40S, SCH 80S, SCH160, SCH XXS (Customization Available)
Application
- Pharmaceutical and Semiconductor Industries
- Heat Exchangers and Boilers
- Food and Beverage Processing
- Energy Sectors
- Food & Dairy Plants
- Architectural and Decorative Uses
- Pharmaceutical Plant
End
Plain End, Beveled End, Threaded
Processing
Cut-to-length; Polishing.
Inspection
- 100% PMI TESTED
- EN10204.3.1B MILL TEST CERTIFICATE
- THIRD PARTY INSPECTION ACCEPTED
Delivery Condition
Cold Drawn, Annealed and Pickled/ Polished /Bright Annealed/ Sand blasting/ Shot Blasting.
Marking
All SS SMLS Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or as per the customer’s request)
Packing
Packed in Wooden Boxes, plywood cases, Steel Strips Bundled, or as per Customers Requests
Specials
Sizes and Specifications other than above can be customized on request.
Specification Parameters
A269/270/213 TP304L Chemical Composition
| HEAT NO. | CHEMICAL COMPOSITION (%) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | Mn | P | S | Si | Ni | Cr | Mo | ||
| STAND. | MIN. | 8.00 | 18.00 | ||||||
| MAX. | 0.035B | 2.00 | 0.045 | 0.030 | 1.00 | 12.00 | 20.00 | ||
A269/270/213 TP304L Mechanical Properties
| Mechanical Properties | |||||
|---|---|---|---|---|---|
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness MAX | |
| Rockwell (HRB) | Brinell (HBW) | ||||
| ASTM A269 TP304L | 90 | 192 | |||
| ASTM A213 TP304L | 485 | 170 | 35 | 90 | 192 |
| ASTM A270 TP304L | 485 | 170 | 35 | B90 | |
Equivalent Grades - (ASTM A269/270/213 TP304L Equivalent Grades)
| ASTM A269/270/213 TP304L Equivalent Grades | ||||||
|---|---|---|---|---|---|---|
| China (GB) | U.S. (ASTM/UNS) | Europe (EN) | Japan (JIS) | Germany (DIN) | International (ISO) | Russia (GOST) |
| 06Cr19Ni10 (022Cr19Ni10) | 304L (UNS S30403) | 1.4307 (X2CrNi18-9) | SUS304L | X2CrNi18-9 (1.4307) | X2CrNi18-9 | 03Kh18N11 |
ASTM A269/A269M Standard Cold Machining Size Deviation Permitted
| ASTM A269/A269M Standard cold machining size deviation permitted | ||||||
|---|---|---|---|---|---|---|
| Group | Size, Outside Diameter, in. [mm] | Permissible Variations in Outside Diameter, in. [mm] | Permissible Variations in Wall Thickness, A % | Permissible Variations in Cut Length, in. [mm] B | Thin Walled Tubes C | |
| Over | Under | |||||
| 1 | Up to 1/2 [13] | ±0.005 [0.13] | ±15 | 1/8 [3.2] | 0 | ... |
| 2 | 1/2 to 1 1/2 [13 to 38], excl | ±0.005 [0.13] | ±10 | 1/8 [3.2] | 0 | less than 0.065 in. [1.65 mm] nominal |
| 3 | 1 1/2 to 3 1/2 [38 to 89], excl | ±0.010 [0.25] | ±10 | 3/16 [4.8] | 0 | less than 0.095 in. [2.41 mm] nominal |
| 4 | 3 1/2 to 5 1/2 [89 to 140], excl | ±0.015 [0.38] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 5 | 5 1/2 to 8 [140 to 203], excl | ±0.030 [0.76] | ±10 | 3/16 [4.8] | 0 | less than 0.150 in. [3.81 mm] nominal |
| 6 | 8 to 12 [203 to 305], excl | ±0.040 [1.01] | ±10 | 3/16 [4.8] | 0 | less than 0.200 in. [5.08 mm] nominal |
| 7 | 12 to 14 [305 to 356], excl | ±0.050 [1.26] | ±10 | 3/16 [4.8] | 0 | less than 0.220 in. [5.59 mm] nominal |
ASTM A270/A270M Standard Cold Machining Size Deviation Permitted
| ASTM A270/A270M Standard cold machining size deviation permitted | ||||
|---|---|---|---|---|
| Size, Outside Diameter, in. [mm] | Permissible Variations in Outside Diameter, in. [mm] | Permissible Variations in Cut Length, in. [mm] A | ||
| Over | Under | Over | Under | |
| 1.000 [25] and under | 0.005 [0.13] | 0.005 [0.13] | 1/8 [3] | 0 |
| Over 1 [25] to 2 [50] | 0.008 [0.20] | 0.008 [0.20] | 1/8 [3] | 0 |
| Over 2 [50] to 3 [75] | 0.010 [0.25] | 0.010 [0.25] | 1/8 [3] | 0 |
| Over 3 [75] to 4 [100] | 0.015 [0.38] | 0.015 [0.38] | 1/8 [3] | 0 |
| Over 4 [100] to 5 1/2 [140], excl | 0.015 [0.38] | 0.015 [0.38] | 3/16 [5] | 0 |
| 5 1/2 [140] to 8 [200], excl | 0.030 [0.75] | 0.030 [0.75] | 3/16 [5] | 0 |
| 8 [200] to 12 [300] | 0.050 [1.25] | 0.050 [1.25] | 3/16 [5] | 0 |
Frequently Asked Questions
What is TP304L stainless steel?
TP304L is a low-carbon variant of TP304 stainless steel, limiting carbon content to 0.035% or less. This design minimizes chromium carbide precipitation during welding to enhance intergranular corrosion resistance.
What standards apply to ASTM A269/270/213 TP304L tubes?
These tubes comply with ASTM A269 (seamless and welded tubing for general service), ASTM A270 (seamless and welded sanitary tubing), and ASTM A213 (seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes).
What are the primary applications of TP304L tubing?
It is extensively utilized in industries requiring high-purity and corrosion-resistant surfaces, including pharmaceutical plants, semiconductor manufacturing, food and beverage processing, heat exchangers, boilers, and architectural decoration.
What inspection standards do these tubes undergo?
Standard quality assurance inspections include 100% PMI (Positive Material Identification) testing, EN10204 3.1B Mill Test Certificates, and optional third-party inspections to meet client requirements.
What delivery conditions can be requested for TP304L pipes?
Pipes can be supplied in various conditions including Cold Drawn, Annealed and Pickled, Bright Annealed, Polished, Sand Blasted, or Shot Blasted depending on application needs.
Can custom sizes and specifications be ordered?
Yes, while standard sizes range from 1/8" NB to 32" NB, custom dimensions, wall thicknesses, and special cut-to-length configurations can be manufactured upon request.